mortar additives concrete admixture cement additive from China manufacturer - Hunan Zhenxing Building Materials Science & Technology Co., Ltd

mortar additives concrete admixture cement additive

Payment Terms:	T/T
Place of Origin:	Hunan, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MT-2

Production Capacity: 5,000ton

Delivery Date: 90days after TT payment

Means of Transport: Ocean

Packing: 25kg/bag

MODELE is mortar additive for plastering construction,, so it solves the problems of crack-hollow and cracks of mortar.

Brief Introduction:

MODELE is mortar additive for plastering construction with good workability. It has performances of enhancing cohesive strength and water retention, so it solves the problems of low-workability in construction, low cohesive strength, and low water retention, culvert construction projects.

Features:

High cohesive strength, small shrinkage, non- crack-hollow and non-crack.

High water retention, no secreting, convenient to use in construction projects.

Usage:

1. Mixing procedure while using vertical mixers, horizontal mixers: Firstly, mix part sand, agent and water and stir them uniformly. Put cement and all sand into them. At last, stir the mixture for 3~5 minutes.

2. Mixing procedure while using drum-type mixers: Put agent, cement, and sand together, stir them for 1 minute. And then add water to the mixtures and stir for 3~5minutes.

3. Artificial mixing: the agent should be first dissolved into the water then placed into mortar.

4. The first mixing mortar, the quantity of agent should be increased 1 time.

5 The water in the mortar with the agent should be reduced by 20%.

6 The mixture ratio of agent fluctuates with different cement and sand. So the reasonable ratio should be depended on the materials at the site and trial.

Reference Mixture Ratio:

There are general type and anti-cracking, anti-seepage type of the agent, 25kg/bag for each type. And there is a measurement spoon in every pack. The mixture ratio of agent to cement is respectively 0.5%-0.75% and 0.2%--0.3%.

Notes:

1 The agent is non-toxic, non-inflammable. The valid period is 3 years.

2 Avoid sun-baked andrain proofing, and place the agent in a place with ventilation.

3 Pay attentions to anti-moisture during storage and transportation. If there is a moisture absorption or agglomeration, the function is the same as usual after smashing or dissolve.